Corporate quality
Where your cost of poor quality hides
Acerta LinePulse gives you one view of scrap, rework and warranty risk across every plant, with the root cause in the same place.
Quality teams globally trust Acerta
The problem
Nobody can say where the cost sits
Cost of poor quality, COPQ, hides in three systems that never share a part number: the MES, the warranty database and the complaint log. The same defect gets investigated at three plants by three teams reinventing the same fix, and when an OEM calls after an escape, nobody can say how many bad parts got out or when the process drifted.
With volume flat and OEM price pressure relentless, that cost has to come out from inside the four walls of the plant.
What LinePulse does
One view of quality across every plant
See where FTT and yield slip
Answers in Cpk and FTT, not model output
Models trained on manufacturing failure modes catch multi-signal drift before a part fails, then narrow down why. Results read in Cpk and FTT, with no data scientist between the signal and the answer.
Every plant on the same standard
How it works
From plant data to a named cause, in four steps
Connect
MES, PLCs, SCADA and end-of-line test benches feed LinePulse through one ingestion API. Nothing is replaced.
Map
Every signal lands in one schema of plant, line, station, operation and signal.
Analyze
Pre-trained models run anomaly detection and root cause analysis on live production.
Act
Alerts and capability reports reach the team in Microsoft Teams, with the affected serial numbers attached.
Proven impact
What one Dana axle plant measured
LinePulse is an important solution in Dana’s digital strategy and helps our manufacturing teams automate overhead, monitor and manage product quality, and optimize productivity.
Joel Scott, VP, Global Continuous Improvement, Dana
Keep reading
Keep going
FAQ
What quality leaders ask us
1. What is cost of poor quality and how does LinePulse reduce it?
Cost of poor quality is the total a manufacturer pays for defects: internal scrap and rework, warranty claims, customer chargebacks, and the labor spent investigating and containing issues. LinePulse reduces it by catching process drift earlier, which lowers scrap, by speeding up root cause analysis, which lowers investigation labor, and by tying data to individual parts, which narrows containment.
2. Can LinePulse work across multiple plants?
Yes. LinePulse is built for multi-plant deployment. One data model means FTT, yield and Cpk are calculated the same way at every site, so plants can be compared even when they run different tools and definitions today. When one plant finds a fix, the same analytical framework is scaled to the others.
3. Can LinePulse reduce customer escapes and warranty claims?
Yes. By detecting process drift and multivariate anomalies before parts go out of spec, LinePulse reduces the number of defective parts that escape internal detection and reach the customer. Stronger traceability also cuts the scope and cost of a warranty investigation, because the affected units and the root cause are pinpointed faster.
4. How does LinePulse help during a quality escape or containment event?
The critical questions in a containment event are which units are affected and why. LinePulse ties process parameters and test results to individual units across production, so teams can identify the precise scope of an issue instead of quarantining broadly. Multivariate root cause analysis then shortens the time to find what caused the escape.
5. How does LinePulse help meet IATF 16949 6th Edition?
Under 6th Edition enforcement, auditors are moving from paperwork compliance to proof of proactive, data-backed risk mitigation. LinePulse binds high-frequency machine traces, leak tests and component lot histories to individual part serial numbers, so when an auditor or an OEM asks for evidence of process capability, it is exported the same day.
6. Does LinePulse give full traceability across the line?
LinePulse ties process parameters and test results to individual units across production, not just lot-level tracking from an ERP. During a warranty investigation or a containment event, that lets the team answer which units from which lots are affected with confidence, instead of quarantining broad batches because the data is incomplete.






